NOx reduction in diesel engines using rate shaping and pilot injection

Publication Type:

Journal Article

Source:

International Journal of Automotive Technology and Management, Volume 7, Number 1, p.17-31 (2007)

URL:

https://www.scopus.com/inward/record.uri?eid=2-s2.0-34249794851&doi=10.1504%2fIJATM.2007.013381&partnerID=40&md5=52db2c39c4ac947cc55e6cd4c46c25bb

Abstract:

Reduction in NOx and soot in light and medium duty diesel engines and meeting the US emission standards is an important challenge. This paper shows how Injection Rate Shaping (IRS) should be performed to reduce NOx while engine performance and soot formation remain almost constant. Effects of intercooler with and without rate shaping on NOx reduction will be investigated. Results indicated that the rate shaping and pilot/split injection was an effective technique to reduce NOx at some operating condition. Combined effects of intercooler and rate shaping have shown a reduction of NOx by 50% for some operating conditions. At idle condition, a split injection was found to be a good solution for NOx reduction. A combustion simulation computer program was used in this analysis for six different operating conditions. It was found that the cost of modification of the production line is negligible for mass injector production. Copyright © 2007 Inderscience Enterprises Ltd.

GIS Gerpisa / gerpisa.org
61 avenue du Président Wilson - 94230 CACHAN
+33(0)1 47 40 59 50

Copyright© Gerpisa
Concéption Tommaso Pardi
Administration Géry Deffontaines

Powered by Drupal, an open source content management system